soni PUR-VS60

soni PUR-VS60 composite foam for easy sound-proofing of walls

  • Excellent sound transmission insulation
  • Multicolor-veined composite foam
  • High-quality recycling product


Content: 0.5 m² (€29.80* / 1 m²)
Prod. no. H80PURVS60

Available, delivery time 2-5 days


Our soni PUR-VS60, a multicolor-veined composite foam made from polyurethane acoustic foam, is an ideal sound-insulation material for walls and ceilings. What makes soni PUR-VS60 so special is its excellent sound-absorption and sound-insulation capacity, which allows for effective sound-transmission prevention.

When mounted in the empty space behind a curtain wall or false ceiling, soni PUR-VS60 minimizes the propagation of noise, vibration and resonances – for improved sound insulation of partitions, walls and ceilings. This puts an effective stop to the transmission of ambient noise or annoyingly loud sounds from neighboring apartments. 

Advice on building a curtain wall:

For a curtain wall, dowel wooden laths of 30 or 50 mm thickness to the wall. Ideally, an elastic layer is placed between the wall and the laths to prevent sound bridges. Our soni NBR sealing tape is the ideal solution for such an elastic mounting. Then insert our sound absorber product soni PUR-VS60 in the empty spaces between the laths and cover them with plaster boards or particle boards screwed to the laths. For even more effective sound absorption, soni PUR-VS60 can be mounted on the wooden laths (30 mm) instead of being applied directly on the wall. The resulting air gap acts as an extra sound insulation. To optimize the curtain wall you can "decouple" the plaster board / particle board from the floor and ceiling as well as the adjacent walls by filling the edge joints with acrylic.

For an example of a curtain wall construction for noise insulation purposes, please see the testimonial "Neighbors / Curtain Walling”. 

Technical data
Acoustic benefits: sound insulating
Applications: Wall towards neighbors | Curtain wall
Basic material: PUR foam
Color: varicolored
Flammability: FMVSS 302, automotive fire safety standard
Note: easy handling
high ageing stability
flammability details see technical data sheet
Rear face: not self-adhesive (nk)
Size: 1000 x 500 mm
Temperature resistance: -40°C to +100°C
Thickness: 50 mm
Weight: 1.500 g
Product information request


Our soni SPECIAL ADHESIVE is an ideal adhesive for spot and full-surface fixation of sound-insulation materials and acoustic elements made of open-cell foam, especially melamine and PUR foams. The solvent-free, stable soni SPECIAL ADHESIVE provides excellent adherence to typical building materials, such as concrete, plaster, masonry, cement and wood. With the elastoplastic, single-component polymer adhesive, our open-cell foam panels can be glued directly to the wall or ceiling. Our soni SPECIAL ADHESIVE is available in 310-ml-cartridges, in sets of 6 or 12 cartridges. Please note: soni SPECIAL ADHESIVE is not suitable for PE foams such as soni RESIST. Keep out of reach of children!

Variants from €5.90*
soni NBR sealing tape
soni NBR sealing tape is a closed-cell sealing material on the basis of NBR. A typical application of soni NBR is in the construction of a curtain wall, where it acoustically decouples the wooden lathing. Because of its suitability for contact with oils, e.g. engine oil, our sealing and decoupling tape has also proven to be an excellent solution for use in many technical areas as well as in vehicles, machines, enclosures, hoods and much more. Moreover, it is exceptionally hard-wearing and extremely resistant against deformation.  The self-adhesive rear face makes installation fast and easy. Roll length: 5 mThickness: 5 mmWidth: 40 mmHardness Shore 00: 31Tensile strength / ISO 1798: ≥ 205 kPa

Content: 5 m (€1.58* / 1 m)

soni fixing set
For the mechanical fixation of soundproofing material. Set 1 (for 25 to 32 mm thick material) consists of 20 nylon anchors 8x40, 20 screws 6x70/42 and 20 fixation disks. Set 2 (for 50 to 52 mm thick material) consists of 20 nylon anchors 8x40, 20 screws 6x90/56 and 20 fixation disks.

Variants from €10.50*
Our soni MOUNTING PINS offer an easy and fast method for the installation of acoustic materials on smooth and clean surfaces.  soni MOUNTING PINS have a base plate with self-adhesive back. The high-quality adhesive ensures secure installation of our acoustic materials for the long term. Use the enclosed fixation disk to hold the noise protection material in place. And, as a last step, cover the tip of the steel pin with the protective cap. The kit consists of 20 base plates with pin, plus fixation disks and protective caps.Kit 1 (pin length: 42 mm) is suitable for noise-control panels of 25 – 30 mm thicknessKit 2 (pin length: 63 mm) is suitable for noise-control panels of 50 mm thickness


Related products

Color: black | Thickness: 52 mm
soni COMPOSITE is a combination product made from our synthetic soni EVA heavy layer and an acoustic foam laminated with a decorative felt layer. This ideal combination ensures a twofold noise-control effect: sound absorption plus sound insulation – for especially high overall effectiveness in reducing the noise level. soni COMPOSITE is particularly suitable for sound-transmission insulation. Mounted on the wall towards the neighbor’s apartment or behind a so-called curtail wall, for instance, our two-layer acoustic product achieves a noticeable noise reduction. For individual design options, you have the choice of various felt colors. Using a carpet knife, you can cut soni COMPOSITE to the required size and shape. The self-adhesive equipment of the rear face serves primarily as an installation aid.

Content: 0.5 m² (€77.80* / 1 m²)

Variants from €32.90*