soni fixing set
For effortless and secure fixation of acoustic sheets
- For effortless mechanical fixation
- Full set of all parts needed for fixation
- Secure fixation of acoustic panels
Prod. no.
80800030
Available, delivery time 2-5 days
Description
For the mechanical fixation of soundproofing material.
Set 1 (for 25 to 32 mm thick material) consists of 20 nylon anchors 8x40, 20 screws 6x70/42 and 20 fixation disks.
Set 2 (for 50 to 52 mm thick material) consists of 20 nylon anchors 8x40, 20 screws 6x90/56 and 20 fixation disks.
Technical data
| Accessories: | Accessories |
|---|---|
| Applications: |
Living space | Staircase Car | Motor | Boat Clubhouse | Banquet hall Outdoor area | Pool Wall towards neighbors | Curtain wall Production hall | Workshop Heat pump | HVAC Sound studio | Rehearsal room Machine | Compressor | Utility room |
| Note: |
easy handling set 1 for 25 to 30 mm thick material; set 2 for 50 to 52 mm thick material |
| Set 1 / Set 2: | Set 1 (for 25 to 30 mm material) |
Product information request
Related products
soni SPECIAL ADHESIVE
€4.90*
Our soni SPECIAL ADHESIVE is an ideal adhesive for spot and full-surface fixation of sound-insulation materials and acoustic elements made of open-cell foam, especially melamine and PUR foams.
The solvent-free, stable soni SPECIAL ADHESIVE provides excellent adherence to typical building materials, such as concrete, plaster, masonry, cement and wood. With the elastoplastic, single-component polymer adhesive, our open-cell foam panels can be glued directly to the wall or ceiling. Our soni SPECIAL ADHESIVE is available in 310-ml-cartridges, in sets of 6 or 12 cartridges.
Please note: soni SPECIAL ADHESIVE is not suitable for PE foams such as soni RESIST. Keep out of reach of children!
Variants from €5.90*
soni MOUNTING PINS
€12.50*
Our soni MOUNTING PINS offer an easy and fast method for the installation of acoustic materials on smooth and clean surfaces.
soni MOUNTING PINS have a base plate with self-adhesive back. The high-quality adhesive ensures secure installation of our acoustic materials for the long term. Use the enclosed fixation disk to hold the noise protection material in place. And, as a last step, cover the tip of the steel pin with the protective cap.
The kit consists of 20 base plates with pin, plus fixation disks and protective caps.Kit 1 (pin length: 42 mm) is suitable for noise-control panels of 25 – 30 mm thicknessKit 2 (pin length: 63 mm) is suitable for noise-control panels of 50 mm thickness