soni PORTA
Door sound insulation kit - removable exclusive from soniflex
- Easy mounting thanks to self-adhesive rear layer
- Effective and visually appealing sound insulation solution
- Residue-free removal from smooth surfaces
- Assembly video ➥continue to YouTube
Prod. no.
H80400031
Available in 3 days, delivery time 2-5 days
Description
Effective and comfortable door insulation with soni PORTA
Earsplittingly loud music from your teenager's room, bothersome noise from the hallway, loud phone conversations from the adjacent office, lack of discretion in treatment rooms - wherever closed doors are supposed to provide undisturbed quiet, our door insulation kit is the ideal solution for effective noise reduction.Our soni PORTA solution consists of six precisely fitting elements that form an attractive pattern and are simply glued to the door using the two included installation aids and our easy-to-understand installation instructions. Thanks to our unique, protected self-adhesive solution, you can remove soni PORTA again from smooth surfaces without leaving any residue, if necessary, for instance when moving out.
Elegantly shaped cutouts for the door handle, on the left or right as needed, complete the sophisticated design.
Depending on the application, the material has to be mounted either on the inside or on the outside of the door. For this reason, soni PORTA has been designed in two standard heights. It is important to install the door insulation material always on the side of the noise source.
Functional explanation: Sound waves spread out from the noise source and hit the nearest surfaces. In order for these waves to be effectively absorbed or dampened, the insulation material must be installed where the waves first hit – i.e. on the side of the door facing the noise source.
Functional explanation: Sound waves spread out from the noise source and hit the nearest surfaces. In order for these waves to be effectively absorbed or dampened, the insulation material must be installed where the waves first hit – i.e. on the side of the door facing the noise source.
soni PORTA is suitable for the sound insulation of any room door with rebate - in private homes as well as in day-care centers, kindergartens, schools, medical facilities, offices, hotels, banks, etc.
The soni PORTA elements are made of a combination of two highly effective acoustic materials: a heavy layer and an acoustic foam layer. The heavy layer on the underside of soni PORTA is glued directly to the door leaf, increasing its mass and thus the overall sound insulation effect of the door. The visible side consists of an acoustic foam layer covered with an attractive felt material. The foam’s open cells absorb sound energy. The robust and dirt-repellent felt surface is available in trendy colors. The edges of the elements can be masked with our soni VLD adhesive tape, if desired.
For ordering the soundproofing set that fits your door, you will need the outer dimensions of the door leaf. Please measure the width and height of your door leaf on the outside, i.e. on the side in the direction in which your door opens.
Please note: If the gap between the door leaf and the floor is too wide, we recommend mounting a door sweep or a door bottom seal. Only when all gaps and openings around the door are closed, perfect soundproofing is possible.
soni PORTA is also available in a version that is not removable without residue: soni PORTA Basic
1. unhinge the door before installation and place it in a horizontal position on a stable surface.
2. apply the individual insulation elements horizontally to ensure optimum adhesion of the adhesive.
Do not apply when hanging! The weight of the integrated heavy film could cause the adhesive to come loose again (does not apply to soni PORTA Basic).
3. leave the door to rest for at least 24 hours after installation and only hang it up again the next day.
This will ensure that the door insulation remains in place permanently and that optimum sound reduction is achieved!
Important information on installing soni PORTA door insulation:
Correct installation is crucial for soni PORTA to be fully effective:1. unhinge the door before installation and place it in a horizontal position on a stable surface.
2. apply the individual insulation elements horizontally to ensure optimum adhesion of the adhesive.
Do not apply when hanging! The weight of the integrated heavy film could cause the adhesive to come loose again (does not apply to soni PORTA Basic).
3. leave the door to rest for at least 24 hours after installation and only hang it up again the next day.
This will ensure that the door insulation remains in place permanently and that optimum sound reduction is achieved!
Technical data
| Acoustic benefits: |
sound insulating sound insulation and sound absorption sound absorption |
|---|---|
| Applications: |
Living space | Staircase Clubhouse | Banquet hall Kindergarten | School Hospitality | Lunchroom Waiting rooms | Doctor's office Sound studio | Rehearsal room Office | Call center |
| Basic material: |
heavy foil PUR foam |
| Color: |
light grey blue dark grey red sand pink green orange |
| Dimensions with 10 mm installation aid: |
Door dimensions: 860x1985 mm | Side of application: IN | soni PORTA: 800x1955 mm Door dimensions: 860x1985 mm | Side of application: OUT | soni PORTA: 855x1975 mm Door dimensions: 985x1985 mm | Side of application: IN | soni PORTA: 925x1955 mm Door dimensions: 985x1985 mm | Side of application: OUT | soni PORTA: 980x1975 mm |
| Note: |
- There might be minimal color variations between different lots, which will not constitute a reason for complaint. - Only complete kits may be sent back. Elements that have already been glued to a door or where the cover film of the self-adhesive layer has been removed cannot be returned. - Adhesive fixation: Please observe the necessary airing time of 30 minutes as described in the "Cleaning the adhesive substrate" section of our processing and storage instructions. - Parts can no longer be repositioned after gluing. |
| Rear face: | self-adhesive (sk) |
| Thickness: | 52 mm |
| Types of uses: | Door insulation |
Downloads
Further Information
Product information request
Accessories
soni VLD
€19.90*
Our soni VLD felt tapes are ideal for neatly masking edges or taping over joints of our range of colored acoustic products.The attractive surface in appealing trend colors makes our adhesive tapes also a popular material for handicrafts or decorating.The adhesive tapes are available in the same colors as our sound absorbers soni COLOR, soni COLOR RD, soni ELEMENT, soni DESK PARTITION, soni ROOM DIVIDER and soni PORTA.Our soni VLD felt tapes score with a high adhesive strength and excellent durability. The inserted scrim reinforcement prevents stretching.
Variants from €12.90*
WIKO spray adhesive
€13.90*
WIKO spray adhesive - strong adhesion for soundproofing materials
WIKO spray adhesive is the ideal solution for the simple and secure bonding of soundproofing and insulation materials. Thanks to its strong adhesive strength and simple application, it enables reliable fastening to various surfaces.
Advantages of WIKO spray adhesive
✔ High adhesive strength – strong and durable bond for foams, non-woven materials and more
✔ Easy to use – even distribution thanks to practical spray function
✔ Fast drying – efficient processing without long waiting times
✔ Versatile – ideal for mounting acoustic elements, insulation panels and other materials
Whether for wall absorbers, ceiling panels or sound insulation mats - WIKO spray adhesive makes mounting quick, clean and reliable.
Application of WIKO spray adhesive
Preparation
Make sure that the surfaces to be covered are clean, dry and free of dust and grease.
Applying the adhesive
Shake the spray can well.
Spray a thin film of WIKO spray adhesive evenly onto both surfaces: both the sound insulation panel and the surface to be bonded, as it is a contact adhesive.
Flash-off time
Allow the adhesive to flash off for 3-5 minutes. The adhesive should feel tacky but no longer be wet.
Bonding
Press the two surfaces firmly together. Ensure that they are correctly aligned, as the contact adhesive will adhere immediately. Apply even pressure to ensure good adhesion. If necessary, you can use a roller or similar tool.
Note: One spray can is sufficient for approx. 8-10 m².
Related products
soni PORTA Basic
€189.90*
Application to the door leaf:
on the inside (IN)
|
Color:
light grey
|
Standard door dimensions:
860x1985 mm
Effective and comfortable door insulation with soni PORTA Basic
Earsplittingly loud music from your teenager's room, bothersome noise from the hallway, loud phone conversations from the adjacent office, lack of discretion in treatment rooms - wherever closed doors are supposed to provide undisturbed quiet, our door insulation kit is the ideal solution for effective noise reduction.
Our soni PORTA Basic solution consists of six precisely fitting elements that form an attractive pattern and are simply glued to the door using the included installation aid and our easy-to-understand installation instructions. Elegantly shaped cutouts for the door handle, on the left or right as needed, complete the sophisticated design.
Depending on the application, the material has to be mounted either on the inside or on the outside of the door. For this reason, soni PORTA Basic has been designed in two standard heights. It is important to install the door insulation material always on the side of the noise source.Functional explanation: Sound waves spread out from the noise source and hit the nearest surfaces. In order for these waves to be effectively absorbed or dampened, the insulation material must be installed where the waves first hit – i.e. on the side of the door facing the noise source.
soni PORTA Basic is suitable for the sound insulation of any room door with rebate - in private homes as well as in day-care centers, kindergartens, schools, medical facilities, offices, hotels, banks, etc.
The soni PORTA Basic elements are made of a combination of two highly effective acoustic materials: a heavy layer and an acoustic foam layer. The heavy layer on the underside of soni PORTA Basic is glued directly to the door leaf, increasing its mass and thus the overall sound insulation effect of the door. The visible side consists of an acoustic foam layer covered with an attractive felt material. The foam’s open cells absorb sound energy. The surface ist robust and dirt-repellent. The edges of the elements can be masked with our soni VLD adhesive tape, if desired.
For ordering the soundproofing set that fits your door, you will need the outer dimensions of the door leaf. Please measure the width and height of your door leaf on the outside, i.e. on the side in the direction in which your door opens.
Please note:
If the gap between the door leaf and the floor is too wide, we recommend mounting a door sweep or a door bottom seal. Only when all gaps and openings around the door are closed, perfect soundproofing is possible.
soni PORTA Basic is also available in a version that is removable without residue: soni PORTA
soni CIRCLE
From
€6.90*
Color:
red
|
Size:
Ø 235 mm
soni CIRCLE – stylish acoustic absorbers & wall absorbers for better room acoustics
With soni CIRCLE, you can bring aesthetic design and effective sound insulation into your rooms in one product.
The circular acoustic absorber consists of high-quality white polyester non-woven laminated with decorative felt in modern, trendy colours. Thanks to its combination of functionality and design, soni CIRCLE can be seamlessly integrated into any interior design – whether in an office, meeting room, classroom, lobby or living room.
Available in two different sizes, the round acoustic elements can be combined individually. This creates an attractive wall design that also reduces reverberation and ensures pleasant room acoustics.
Improve room acoustics with soni CIRCLE wall absorbers
Covering just 30% of the wall or ceiling area with our acoustic absorbers leads to a noticeable reduction in sound. Reverberation is reduced, voices sound clearer and conversations are easier to understand. Especially in open-plan offices, call centres, entrance areas, schools, nurseries, doctors' surgeries or meeting rooms, soni CIRCLE creates a calm, focused atmosphere and contributes significantly to well-being, concentration and productivity.
Fire protection included – safe and stylish
soni CIRCLE acoustic elements meet the relevant fire protection requirements in accordance with DIN EN ISO 13501 (flame retardant).
This means that the wall absorbers are also suitable for public areas where fire safety regulations must be observed – such as office buildings, hotels, schools or cultural institutions.
Easy installation – flexible and clean
To attach soni CIRCLE, we recommend our soni SPECIAL ADHESIVE for permanent and secure attachment to smooth, clean surfaces.
Alternatively, WIKO spray adhesive can also be used – ideal for quick, even and clean application.
If you prefer a removable installation, our soni VELCRO TAPE is a suitable alternative – perfect for flexibly positioning the acoustic absorbers or replacing them if necessary.
Design meets function – modern wall design with sound insulation from soniflex
Whether used individually or as a creative wall composition in various sizes and colours, soni CIRCLE combines aesthetic design with functional sound insulation. The decorative wall absorbers add visual accents while absorbing unpleasant reverberation and sound reflections.
This makes soni CIRCLE the ideal solution for anyone who wants to combine design and acoustic optimisation.
Read the testimonials.
soni CUBE
€59.90*
Color:
dark grey
|
Size:
200 x 200 x 200 mm
Our soni CUBE seat cubes are sound absorbers of a special kind, because in addition to effective sound-conditioning of interior spaces, they score with excellent seating comfort.
The core of the cubes consists of a highly effective acoustic absorber. The outer shell is made from a dirt-resistant, abrasion-proof and flame-retardant felt material available in the latest trend colors. The product’s very good sound-absorption capacity makes soni CUBE perfect for all rooms where an effective sound-insulation solution with additional practical and aesthetic value is wanted. As it ideally combines noise reduction, seating comfort and even playability, this product is a great furniture item for children's rooms, daycare centers, kindergartens or waiting rooms. But the cubes can also be used as (doubly) functional and decorative furnishing elements for exhibition booths and lounges.soni CUBE can be placed individually, grouped or stacked. If you like, you can insert a metal spiral (available from soniflex) into one of the corners and suspend your soni CUBE from the ceiling using a rope or hook – an easy and effective installation method.
soni COLOR RD
€24.90*
Color:
light grey
soni COLOR RD – Acoustic inserts for grid ceilings
soni COLOR RD is our high-quality acoustic insert for grid ceilings measuring 620 x 620 mm, which can be easily inserted into existing suspended standard grid ceilings or Odenwald ceilings (OWA). The elements consist of a sound-absorbing white polyester fleece, laminated with a thin, mottled felt surface in current trend colours. They thus combine aesthetic design and effective sound absorption in one product.
Grid ceilings – function and advantages
Grid ceilings consist of inserts in a supporting grid and are mainly used in offices, schools, medical practices, restaurants and public buildings. They enable flexible room design, easy access to cables and the integration of lighting, ventilation or acoustic elements.
A common problem with grid ceilings is excessive reverberation, as the smooth ceiling surfaces reflect sound. soni COLOR RD noticeably reduces reverberation and noise levels, creating quiet, pleasant working and learning environments.
Effective room acoustics with soni COLOR RD
soni COLOR RD acoustic elements significantly reduce the sound level in a room and help to improve room acoustics in offices, meeting rooms or doctors' surgeries. soni COLOR RD is also a proven acoustic element for noise reduction in schools, daycare centres and nurseries.
soni COLOR RD acoustic elements significantly improve room acoustics, reduce disturbing noises and increase speech intelligibility. They are ideal for:
✔ Offices & meeting rooms – less noise, better concentration
✔ Medical practices & care facilities – more pleasant room climate for patients and staff
✔ Schools, daycare centres & nurseries – targeted noise reduction for concentrated learning
✔ Restaurants & canteens – quieter atmosphere for guests
✔ Home offices & living spaces – comfortable, relaxed environment
Fire protection and standards
soni COLOR RD complies with the fire standards required for the construction industry in accordance with DIN EN ISO 13501-1. This means that the acoustic elements can be used safely in ceilings and as wall cladding – wherever fire protection regulations must be observed.
Installation instructions – flexible and simple
✔ Installation in grid ceilings: The elements are simply inserted into the grid ceiling – no additional fastening is necessary.
✔ As wall absorbers: For installation on smooth, clean surfaces, we recommend our soni SPECIAL ADHESIVE
✔ Alternative installation: soni VELCRO TAPE can be used for removable fastening. Note: Only suitable for wall mounting, not for ceilings
✔ Or with WIKO spray adhesive, which is also very well suited for installing wall absorbers
Design meets function
Thanks to its modern felt surface and wide range of colour options, soni COLOR RD can be creatively integrated into any interior design. This harmoniously combines acoustic measures and interior design, ensuring a pleasant noise level in offices, educational institutions and catering establishments.
Content: 0.384 m² (€64.84* / 1 m²)
soni COLOR Design
€27.90*
Design:
YinYang
|
Color:
green
Our soni COLOR Design tiles are distinctive, colorful design elements measuring 618 x 618 mm for convenient insertion into existing standard grid ceilings or Odenwald-system ceilings (OWA). They will turn every ceiling into a highlight of interior design. Especiallywhen combined with our soni COLOR RD / soni COMFORT SD soundabsorber tiles,the decorative inserts can be used to create delightful patternson the ceiling.
soni COLOR Design tiles consist of a thermally compressed polyester non-woven with a 3D surface, covered with a thin felt layer in fashionable marbled colors. The product is available in two designs: soni COLOR YinYang and soni COLOR Wave. soni COLOR Design has been tested according to the European fire safety regulations set down in DIN 13501-1 and is classified as flame-retardant. This means you can use soni COLOR Design tiles wherever you need to reduce the noise level with materials that meet strict fire safety regulations.
Content: 0.382 m² (€73.04* / 1 m²)
Variants from €15.90*