soni SPECIAL ADHESIVE

Special acoustic adhesive for sound-insulations materials and acoustic elements

Excellent adhesion on a wide variety of substrates
Solvent-free adhesive
Suitable for full-surface and spot application
Watch tutorial ➥continue to YouTube

4 upright and 2 horizontal cartridges of soni special adhesive

Close-up of 3 cartridges of soni special adhesive

Sound absorber soni CIRCLE on the back is attached to the back with a cartridge adhesive.

Cartridge / Set of 6 or 12 cartridges

set of 12 cartridges of 310 ml each

cartridge of 310 ml

set of 6 cartridges of 310 ml each

€5.90*

Content: 1 piece(s)

Prices incl. VAT plus shipping costs

Prod. no. 80800012

Available, delivery time: 2-5 days

Description

Our soni SPECIAL ADHESIVE is an ideal adhesive for spot and full-surface fixation of sound-insulation materials and acoustic elements made of open-cell foam, especially melamine and PUR foams.

The solvent-free, stable soni SPECIAL ADHESIVE provides excellent adherence to typical building materials, such as concrete, plaster, masonry, cement and wood. With the elastoplastic, single-component polymer adhesive, our open-cell foam panels can be glued directly to the wall or ceiling.

Our soni SPECIAL ADHESIVE is available in 310-ml-cartridges, in sets of 6 or 12 cartridges.

Please note:

soni SPECIAL ADHESIVE is not suitable for PE foams such as soni RESIST.

Keep out of reach of children!

Technical data

Accessories:	Accessories
Applications:	Living space \| Staircase Car \| Motor \| Boat Clubhouse \| Banquet hall Indoor swimming pool \| Sports facility Kindergarten \| School Hospitality \| Lunchroom Waiting rooms \| Doctor's office Wall towards neighbors \| Curtain wall Production hall \| Workshop Heat pump \| HVAC Sound studio \| Rehearsal room Office \| Call center Machine \| Compressor \| Utility room
Cartridge / Set of 6 or 12 cartridges:	cartridge of 310 ml
Color:	white
Note:	- Sufficient for approx. 2 m² - Easy handling
Temperature resistance:	-20°C to +80°C

Downloads

Technical data sheet

Product information request

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

By selecting continue you confirm that you have read and agree to our data protection information.

Related products

WIKO spray adhesive

WIKO spray adhesive - strong adhesion for soundproofing materials WIKO spray adhesive is the ideal solution for the simple and secure bonding of soundproofing and insulation materials. Thanks to its strong adhesive strength and simple application, it enables reliable fastening to various surfaces. Advantages of WIKO spray adhesive ✔ High adhesive strength – strong and durable bond for foams, non-woven materials and more ✔ Easy to use – even distribution thanks to practical spray function ✔ Fast drying – efficient processing without long waiting times ✔ Versatile – ideal for mounting acoustic elements, insulation panels and other materials Whether for wall absorbers, ceiling panels or sound insulation mats - WIKO spray adhesive makes mounting quick, clean and reliable. Application of WIKO spray adhesive Preparation Make sure that the surfaces to be covered are clean, dry and free of dust and grease. Applying the adhesive Shake the spray can well. Spray a thin film of WIKO spray adhesive evenly onto both surfaces: both the sound insulation panel and the surface to be bonded, as it is a contact adhesive. Flash-off time Allow the adhesive to flash off for 3-5 minutes. The adhesive should feel tacky but no longer be wet. Bonding Press the two surfaces firmly together. Ensure that they are correctly aligned, as the contact adhesive will adhere immediately. Apply even pressure to ensure good adhesion. If necessary, you can use a roller or similar tool. Note: One spray can is sufficient for approx. 8-10 m².

€13.90*

Overview of the contents of the soni mounting set

soni FIXING SET

For the mechanical fixation of soundproofing material. Set 1 (for 25 to 32 mm thick material) consists of 20 nylon anchors 8x40, 20 screws 6x70/42 and 20 fixation disks. Set 2 (for 50 to 52 mm thick material) consists of 20 nylon anchors 8x40, 20 screws 6x90/56 and 20 fixation disks.

Variants from €11.50*

€9.50*

Details

soni MOUNTING PINS (20 pieces)

Our soni MOUNTING PINS offer an easy and fast method for the installation of acoustic materials on smooth and clean surfaces. soni MOUNTING PINS have a base plate with self-adhesive back. The high-quality adhesive ensures secure installation of our acoustic materials for the long term. Use the enclosed fixation disk to hold the noise protection material in place. And, as a last step, cover the tip of the steel pin with the protective cap. The kit consists of 20 base plates with pin, plus fixation disks and protective caps.Kit 1 (pin length: 42 mm) is suitable for noise-control panels of 25 – 30 mm thicknessKit 2 (pin length: 63 mm) is suitable for noise-control panels of 50 mm thickness

€13.50*

Details

A white roll of soni KLETTBAND standing.

soni VELCRO tape

Strongly adhesive Velcro tape - for easy and fast installation of acoustic materials made from polyester (PES) non wovens. (Only for wall mounting)Our soni VELCRO tape is ideal for fastening acoustic elements such as soni ELEMENT, soni COMFORT, soni CIRCLE or soni HEXAGON. Cut the Velcro strip to the desired length and press the Velcro sidefirmly onto the non-wovenmaterial of the acoustic product. Then peel off theprotective filmand glue the element to the wall at the desired position. This fixingmethod allows you to remove or replace the acoustic element at any time if necessary. Recommended length of the Velcro tape: For a secure hold, cut the Velcro tape to approximately the width of the acoustic element.

Content: 5 m (€4.98* / 1 m)

€24.90*

3 soni suspension hooks shown from the front and back

soni RING HANGER

soni RING HANGER - for easy and fast mounting of acoustic materials. An excellent solution for the installation of sound absorbers such as soni ELEMENT, soni PROTECT or soni COMFORT.After removing the protective film, affix the soni ring hanger at the desired place on the acoustic element and hang the element from a screw hook (not included in the scope of delivery) or similar on the wall or ceiling.Ring hanger, self-adhesive for strong, long-term bondDimensions: 4.5 x 4.5 cm + ringMax. load per ring hanger: max. 1 kg

€1.80*

soniflex foam suspension spirals (24 pieces)

Acoustic baffles are hung from the ceiling by means of foam-suspension spirals (mind. 50 mm). They are easily inserted into the sheets and can be suspended by means of the eyelets on a wire rope or suspended from hooks.The eyelets can be bent open to serve as hooks. Dimensions: diameter 15 mm, total length 80 mm, length of the coils 69 mm A kit consists of 24 spirals.

Content: 24 piece(s) (€1.04* / 1 piece(s))

€24.90*

soni SPECIAL ADHESIVE

Special acoustic adhesive for sound-insulations materials and acoustic elements

Contact us