Equip your machine / compressor /utility room with our sound absorbers and benefit from:

  • a perceptible reduction of the noise level
  • an acoustically effective casing for your noisy machine
  • an ideal sound-insulating compressor wrap
  • reduced solid-born sound transmission
  • reliable protection against the infiltration of oil, dust, etc.
  • a reduction of the sound transmission to adjacent rooms
soni SPECIAL ADHESIVE
Cartridge / Set of 6 or 12 cartridges: cartridge of 310 ml
Our soni SPECIAL ADHESIVE is an ideal adhesive for spot and full-surface fixation of sound-insulation materials and acoustic elements made of open-cell foam, especially melamine and PUR foams. The solvent-free, stable soni SPECIAL ADHESIVE provides excellent adherence to typical building materials, such as concrete, plaster, masonry, cement and wood. With the elastoplastic, single-component polymer adhesive, our open-cell foam panels can be glued directly to the wall or ceiling. Our soni SPECIAL ADHESIVE is available in 310-ml-cartridges, in sets of 6 or 12 cartridges. Please note: soni SPECIAL ADHESIVE is not suitable for PE foams such as soni RESIST. Keep out of reach of children!

€5.90*
soni 1116 ALG
Thickness: 4 mm
soni 1116 ALG is a two-component material for heat protection and acoustic insulation: The heat-resistant surface layer is made from a high-quality aluminum foil and reliably reflects heat radiation. The bottom layer consists in a quilted glass fiber mat, which is responsible for the heat insulation effect as well as for the sound-insulation properties. Our soni 1116 ALG is optimally suited for use in the hot zones of vehicles and machines. When mechanically fixed, the acoustically effective insulation mat withstands temperatures of up to 600°C. The aluminum surface doubles as barrier preventing the penetration of oil, water and fuel. The material meets the fire safety standards for the automotive industry as set down in FMVSS 302 and DIN 75200. Simply use a carpet knife to cut soni 1116 ALG to the required size and shape. The optional self-adhesive rear face facilitates the installation of the panels. 

Content: 0.5 m² (€45.80* / 1 m²)

€22.90*
soni 471
Thickness: 10 mm
Ordering acoustic panels from soniflex soni 471 is a sound absorber made from PUR- foam. In a thermal embossing process its surface has not only been provided with an attractive diamond pattern, but also compacted and sealed, making it very robust and dirt-resistant. What is more, the air-permeable embossing improves the material’s acoustic effectiveness - especially in the frequency range of engine noise. Uses for soni 471 Our soni 471 acoustic foam scores with high hydrolysis resistance and is predominantly used in the automotive industry. For instance, soni 471 is ideally suited for use as sound-absorbing and heat-insulating interior lining in mobile homes, vintage and classic cars or other vehicles. It meets the fire safety standards for the automotive industry as set down in FMVSS 302 and DIN 75200.   soni 471 is easy to cut to the desired size and shape with a carpet knife. Its low weight as well as the optional self-adhesive rear face make for easy and time-saving installation of the material. 

Content: 0.5 m² (€21.80* / 1 m²)

€10.90*
soni 491
Thickness: 10 mm
soni 491 is a PUR acoustic foam coated with a micro-perforated film. The sound-permeable film prevents the penetration of dirt and liquids and can be wiped clean. Our soni 491 acoustic foam has proven its effectiveness in many years of practical use, successfully minimizing noise levels and providing thermal insulation in engine compartments and vehicle interiors. It meets the fire safety standards for the automotive industry as set down in FMVSS 302 and DIN 75200. Also for the insulation of your roller shutter box we can recommend the PUR foam without restrictions.  soni 491 scores with high hydrolysis resistance and hence significantly higher aging stability.The material is easy to cut to the desired size and shape with a carpet knife. Moreover, the self-adhesive rear face makes installation fast and easy. 

Content: 0.5 m² (€27.80* / 1 m²)

€13.90*
soni 491 STL
Our soni 491/STL noise-control panel is a highly effective sound-insulation product based on PUR foam, equipped with a micro-perforated surface film and additionally with a heavy layer. This clever combination of two different acoustic materials ensures both sound-insulating and sound-absorbing properties in one product. soni 491 STL is suitable, for example, for boosting the sound insulation effectivity of a wall, partition wall or ceiling. Advice on building a curtain wall: For a curtain wall, dowel wooden laths of 30 or 50 mm thickness to the wall. Ideally, an elastic layer is placed between the wall and the laths to prevent sound bridges. Our soni NBR sealing tape is the ideal solution for such an elastic mounting. Then insert our sound-absorber product soni 491 STL in the empty spaces between the laths and cover them with plaster boards or particle boards screwed to the laths. To optimize the curtain wall you can "decouple" the plaster board / particle board from the floor and ceiling as well as the adjacent walls by filling the edge joints with acrylic.For an example of a curtain wall construction for noise insulation purposes, please see the testimonial "Neighbors / Curtain Walling”.  If you do not have the tools and/or the time to cover the sound-insulation panels with plasterboard or chipboard, we recommend our soni COMPOSITE as an alternative sound-insulation material. In contrast to soni 491 STL, soni COMPOSITE scores with a stylish decorative felt surface that is available in different colors and excellent for visible sound-conditioning materials.

Content: 0.5 m² (€39.80* / 1 m²)

€19.90*
soni ALU-01
Length of reel: 10 m | Width: 40 mm
Our soni ADHESIVE TAPES are ideal for masking edges, covering and protecting fragile surfaces as well as for concealing joints and cracks. They score with excellent adhesion on a variety of substrates. Thanks to their wide range of applications, our soni ADHESIVE TAPES have become a bestseller in professional and private contexts. soni ALU-01 ADHESIVE TAPE is an aluminum-based adhesive tape that adheres very well to smooth, clean and grease-free surfaces. Its scrim reinforcement makes for extra tear-resistance. This adhesive tape is the perfect fit for our acoustic products soni HEAVY ALU and soni 1116 ALG.

Content: 10 m (€0.95* / 1 m)

€9.50*
soni COMPOSITE
Color: black | Thickness: 32 mm
Order your soundproofing panel from soniflex soni COMPOSITE is a combination product made from our synthetic soni EVA heavy layer and an acoustic foam laminated with a decorative felt layer. This ideal combination ensures a twofold noise-control effect: sound absorption plus sound insulation – for especially high overall effectiveness in reducing the noise level. Applications for soni COMPOSITE soni COMPOSITE is particularly suitable for sound-transmission insulation. Mounted on the wall towards the neighbor’s apartment or behind a so-called curtail wall, for instance, our two-layer acoustic product achieves a noticeable noise reduction. For individual design options, you have the choice of various felt colors. Using a carpet knife, you can cut soni COMPOSITE to the required size and shape. The self-adhesive equipment of the rear face serves primarily as an installation aid.

Content: 0.5 m² (€65.80* / 1 m²)

€32.90*
soni DECOR
Rear face: not self-adhesive (nk) | Thickness: 30 mm
Our soni DECOR acoustic foam consists of polyurethane- foam laminated with a sound-absorbing non-woven surface layer. The black polyester non-woven is extremely robust as well as oil- and fuel-repellent. Due to the resistant non-woven surface, soni DECOR is widely used in technical applications. For instance, soni DECOR is ideally suited for use as sound-absorbing and heat-insulating interior lining in mobile homes, classic cars or other vehicles. Also in your home workshop, soni DECOR will achieve an effective noise reduction. Using a carpet knife, you can cut soni DECOR to the required size and shape. The material’s low weight as well as the optional self-adhesive rear face make for easy and time-saving installation. For fixing the non self-adhesive version we recommend our soni SPECIAL ADHESIVE The premium soni DECOR soundproofing panel scores not only with its excellent sound-absorbing properties, but also with its outstanding quality. The first-class acoustic foam contributes to optimum noise reduction in all kinds of indoor and technical areas and provides optimum sound absorption efficiency. The DECOR sound-absorbing panel is particularly recommended for noise reduction in production halls, workshops, rehearsal rooms and recording studios. Also for reducing the noise emitted by vehicles or machines as well as in engine compartments, the soni DECOR noise absorption panel is the product of choice. Do you have questions about our soni DECOR soundproofing panel? Please feel free to contact us. We shall be pleased to provide help and advice!

Content: 0.5 m² (€31.80* / 1 m²)

€15.90*

Description


Sound insulation for machines | technical equipment | compressors

As a rule, any machine, whether large or small, will generate noise. The resulting noise level can be very unpleasant. This is why we recommend enclosing the machine or other equipment with a noise-reducing casing - ideally at a distance of about 30 cm from the actual noise source. The enclosure (made of wood, plastic or sheet metal) should be lined on the inside with sound-insulating material. Perfect for this use are our products soni RESIST, soni COMPOSITE and soni WAVE.

If the machine is located outside, our soni RESIST is the material of choice. It has both sound-absorbing and sound-insulating properties and hence an especially high overall soundproofing effect. Furthermore, soni RESIST is weather-resistant. If, in addition, the sound-absorbing material will be exposed to sunlight, we recommend our soni RESIST UV. With its unique UV stability, it is specially designed for outdoor use. For those particularly noisy compressors, the ideal choice is our soni SB 700, a highly sound-absorbing polyester fleece combined with a heavy layer. This optimum combination insulates and dampens in equal measure and thus provides excellent noise protection.

As a further measure, the utility room or workshop containing the compressor, ventilation/air conditioning equipment or a noisy machine can be insulated using sound-absorbing materials. This prevents any annoying noise from being transmitted to neighboring rooms or rooms above. Contact us to find out more.

Testimonials

Chiller noise control

After the successful acoustic insulation of a chiller, a customer wrote:

The problem: The noise caused by the chiller in the storage room was a nuisance in the living quarters above the butcher’s shop. When installing the chiller, we had already made sure to have it acoustically decoupled from the floor so as to prevent solid-borne noise transmission as far as possible. But we also needed to do something to reduce the air-borne noise which was still too loud to be tolerable.

The solution: The installation of soni WAVE sound absorption foam panels on the ceiling of the chiller room has led to a substantial reduction of the sound pressure level. This proved to be a perfect secondary sound protection measure because it prevents the transmission of the air-borne noise caused by the chiller through the ceiling to the living quarters.

Sound insulation of an air compressor

The automobile detailing company E. from Germany, tells us what they did to sound-proof an air compressor:

Our air compressor emitted so much noise that it was impossible for our employees to work right next to it. For this reason we built a solid-wood enclosure for the compressor. Then we lined the interior surfaces of the enclosure with the acoustically highly effective noise absorption foam soni WAVE 50 mm, with self-adhesive rear face. The soni WAVE acoustic foam panels were easy to cut to size using an ordinary carpet knife. For installation, we removed the protective film from the self-adhesive layer on the rear face and then secured the fitted pieces on the corresponding surface areas.

In conjunction with the solid wood of the enclosure, the soni WAVE sound protection panels now ensure optimum acoustic insulation of our air compressor.

Sound insulation of a machine

A company told us about how they achieved effective sound insulation of a machine:

As the noise level in our factory was much too high, we needed to implement sound protection measures. We covered the interior surfaces of the housing of an especially noisy saw with 50-mm thick soni RESIST acoustic panels without self-adhesive rear face. This achieved a double effect: sound absorption and sound insulation. After the installation of the sound protection panels, the machine was much less noisy. The audible noise was reduced to a fraction of its former level.

Noise reduction in a basement boiler room

That’s what one client writes about installing sound absorption panels in a boiler room:

The installation of sound-absorbing soni WAVE acoustic foam panels on the ceiling of our basement boiler room has led to a substantial reduction of the noise from the boiler. The soni WAVE 30-mm noise reduction panels with self-adhesive rear face are perfectly suited for self-adhesive fixation on a smooth concrete ceiling.
As the soni WAVE panels on the ceiling reduce the noise level in the boiler room, considerably less noise is transmitted to the living space on the floor above.

In addition to covering the ceiling with sound-absorbing soni WAVE acoustic foam panels we had a sound insulation housing built around the heat pump in the boiler room. The inside of the housing is also lined with soni WAVE sound absorption material in order to achieve noise reduction right at the source.

The two noise reduction measures – which, by the way, are easy to carry out by skilled laypeople – now ensure optimum noise insulation of our boiler room.

Sound insulation of a swimming pool filter pump in a plant room

One of our customers sent us the following report on a sound insulation project for a swimming pool filter pump:

With the swimming pool filter pump running, the plant room became very noisy and the annoying noise was also clearly audible outside.

Lining a large part of the interior walls of the relatively small plant room with 50-mm thick soni WAVE sound absorption panels has led to a substantial reduction of the sound level. The soni WAVE panels are glued to the wall using the special adhesive from soniflex.

The result: The foam panels with their undulated “egg-crate” surface now absorb much of the noise emitted by the swimming pool filter pump. Outside of the plant room, the noise is hardly audible anymore.