soni DECOR

Sound absorbing acoustic foam sheet

  • Decorative non-woven surface layer
  • Oil- and water-repellent surface
  • Good sound absorption
Rear face


Content: 0.5 m² (€31.80* / 1 m²)
Prod. no. H80451001

Available, delivery time 2-5 days


Our soni DECOR acoustic foam consists of polyurethane- foam laminated with a sound-absorbing non-woven surface layer. The black polyester non-woven is extremely robust as well as oil- and fuel-repellent.

Due to the resistant non-woven surface, soni DECOR is widely used in technical applications. For instance, soni DECOR is ideally suited for use as sound-absorbing and heat-insulating interior lining in mobile homes, classic cars or other vehicles. Also in your home workshop, soni DECOR will achieve an effective noise reduction.

Using a carpet knife, you can cut soni DECOR to the required size and shape. The material’s low weight as well as the optional self-adhesive rear face make for easy and time-saving installation. For fixing the non self-adhesive version we recommend our soni SPECIAL ADHESIVE

Technical data
Acoustic benefits: sound absorption
Applications: Car | Motor | Boat
Production hall | Workshop
Sound studio | Rehearsal room
Machine | Compressor | Utility room
Basic material: PUR foam
Color: black
Flammability: FMVSS 302, automotive fire safety standard
Note: oil- and water-resistant
easy handling
flammability details see technical data sheet
robust textile surface
Rear face: not self-adhesive (nk)
Size: 1000 x 500 mm
Temperature resistance: -40°C to +100°C
Thickness: 30 mm
Weight: 440 g
Product information request


Our soni SPECIAL ADHESIVE is an ideal adhesive for spot and full-surface fixation of sound-insulation materials and acoustic elements made of open-cell foam, especially melamine and PUR foams. The solvent-free, stable soni SPECIAL ADHESIVE provides excellent adherence to typical building materials, such as concrete, plaster, masonry, cement and wood. With the elastoplastic, single-component polymer adhesive, our open-cell foam panels can be glued directly to the wall or ceiling. Our soni SPECIAL ADHESIVE is available in 310-ml-cartridges, in sets of 6 or 12 cartridges. Please note: soni SPECIAL ADHESIVE is not suitable for PE foams such as soni RESIST. Keep out of reach of children!

Variants from €5.90*
soni VLC-01
Our soni ADHESIVE TAPES are ideal for masking edges, covering and protecting fragile surfaces as well as for concealing joints and cracks. They score with excellent adhesion on a variety of substrates. Thanks to their wide range of applications, our soni ADHESIVE TAPES have become a bestseller in professional and private contexts. Our soni VLC-01 ADHESIVE TAPE with black non-woven surface perfectly matches the visible face of our black soni DECOR and soni COMPOSITE acoustic panels. It is ideal for covering outer edges or masking joints. The integrated scrim reinforcement prevents stretching.

Content: 10 m (€1.79* / 1 m)

Our soni MOUNTING PINS offer an easy and fast method for the installation of acoustic materials on smooth and clean surfaces.  soni MOUNTING PINS have a base plate with self-adhesive back. The high-quality adhesive ensures secure installation of our acoustic materials for the long term. Use the enclosed fixation disk to hold the noise protection material in place. And, as a last step, cover the tip of the steel pin with the protective cap. The kit consists of 20 base plates with pin, plus fixation disks and protective caps.Kit 1 (pin length: 42 mm) is suitable for noise-control panels of 25 – 30 mm thicknessKit 2 (pin length: 63 mm) is suitable for noise-control panels of 50 mm thickness

soni fixing set
For the mechanical fixation of soundproofing material. Set 1 (for 25 to 32 mm thick material) consists of 20 nylon anchors 8x40, 20 screws 6x70/42 and 20 fixation disks. Set 2 (for 50 to 52 mm thick material) consists of 20 nylon anchors 8x40, 20 screws 6x90/56 and 20 fixation disks.

Variants from €10.50*

Related products

soni COMPOSITE is a combination product made from our synthetic soni EVA heavy layer and an acoustic foam laminated with a decorative felt layer. This ideal combination ensures a twofold noise-control effect: sound absorption plus sound insulation – for especially high overall effectiveness in reducing the noise level. soni COMPOSITE is particularly suitable for sound-transmission insulation. Mounted on the wall towards the neighbor’s apartment or behind a so-called curtail wall, for instance, our two-layer acoustic product achieves a noticeable noise reduction. For individual design options, you have the choice of various felt colors. Using a carpet knife, you can cut soni COMPOSITE to the required size and shape. The self-adhesive equipment of the rear face serves primarily as an installation aid.

Content: 0.5 m² (€59.80* / 1 m²)

Variants from €32.90*
soni WAVE
Our soni WAVE egg crate acoustic foam is a highly effective noise-control product made from PUR-foam with a structured “egg-crate” surface. The sealed but air-permeable surface (patented process) absorbs sound waves effectively and is also reliably oil-, water- and fuel-repellent.  The visually attractive wave structure of the surface ensures excellent absorption values in all frequency bands. With its robust structure and excellent noise-absorption capability, soni WAVE is a unique kind of napped acoustic foam that is especially suited to technical applications, for instance in noise-control enclosures for machines.  Its excellent absorption values and its characteristic profiled surface make it also very popular for use in recording studios and music rehearsal rooms.  soni WAVE egg crate acoustic foam is easy to cut to the desired shape with a carpet knife. The low weight as well as the optional self-adhesive rear face make for easy and time-saving installation of the material. For fixing the non self-adhesive version of our soni WAVE panels, we recommend our soni SPECIAL ADHESIVE. 

Content: 0.5 m² (€19.80* / 1 m²)

Variants from €11.90*