soni COMPOSITE

Sound insulation sheets for wall and ceiling

Sound insulation and sound dampening in a single product
Robust and dirt-resistant surface
Combination product: heavy layer plus acoustic foam layer
Watch tutorial - curtail wall ➥continue to YouTube
Watch tutorial - compressor enclosure ➥continue to YouTube

Color

Thickness

32 mm

52 mm

€35.90*

Content: 0.5 m² (€71.80* / 1 m²)

Prices incl. VAT plus shipping costs

Prod. no. H80400002

Available in 15 days, delivery time 2-5 days

Description

Order your soundproofing panel from soniflex

soni COMPOSITE is a combination product made from our synthetic soni EVA heavy layer and an acoustic foam laminated with a decorative felt layer. This ideal combination ensures a twofold noise-control effect: sound absorption plus sound insulation – for especially high overall effectiveness in reducing the noise level.

Applications for soni COMPOSITE

soni COMPOSITE is particularly suitable for sound-transmission insulation. Mounted on the wall towards the neighbor’s apartment or behind a so-called curtail wall, for instance, our two-layer acoustic product achieves a noticeable noise reduction. For individual design options, you have the choice of various felt colors.

Using a carpet knife, you can cut soni COMPOSITE to the required size and shape. The self-adhesive equipment of the rear face serves primarily as an installation aid.

Technical data

Acoustic benefits:	sound insulating sound insulation and sound absorption sound absorption
Applications:	Car \| Motor \| Boat Wall towards neighbors \| Curtain wall Production hall \| Workshop Heat pump \| HVAC Sound studio \| Rehearsal room Machine \| Compressor \| Utility room
Basic material:	heavy foil PUR foam
Color:	sand
Flammability:	FMVSS 302, automotive fire safety standard
Note:	- Oil- and water-resistant - Dirt-repellent - Easy handling - Flammability details see technical data sheet - Robust textile surface
Rear face:	self-adhesive (sk)
Size:	1000 x 500 mm
Temperature resistance:	-40°C to +100°C
Thickness:	32 mm
Weight:	2.000 g

Downloads

Technical data sheet

Instructions for storage and use

Assembly Instructions Curtain Wall

Product information request

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

By selecting continue you confirm that you have read and agree to our data protection information.

Accessories

2 rolls of non-woven adhesive tape in two different widths standing next to each other

soni VLC-01

Our soni ADHESIVE TAPES are ideal for masking edges, covering and protecting fragile surfaces as well as for concealing joints and cracks. They score with excellent adhesion on a variety of substrates. Thanks to their wide range of applications, our soni ADHESIVE TAPES have become a bestseller in professional and private contexts. Our soni VLC-01 ADHESIVE TAPE with black non-woven surface perfectly matches the visible face of our black soni DECOR and soni COMPOSITE acoustic panels. It is ideal for covering outer edges or masking joints. The integrated scrim reinforcement prevents stretching.

Content: 10 m (€1.79* / 1 m)

€17.90*

Details

Standing roll of black sealing tape soni NBR

soni NBR sealing tape

Order your sealing tape from soniflex Our sealing tape is one of various products that can be used for sealing off specific areas or decoupling different elements from each other: an ideal and easy to use solution! soni NBR sealing tape is a closed-cell sealing material produced on the basis of NBR. Sealing tape from soniflex offers you a high level of safety, reliability and quality that you can rely on! Properties of soni NBR sealing tape The self-adhesive sealing tape is made of a closed-cell material and scores with a range of specific properties that make it particularly versatile to use. This sealing tape can withstand temperatures from -40 to +80 degrees and also offers a high level of safety and reliability. Thanks to its self-adhesive equipment, the application of soni NBR sealing tape is quick and easy. The high adhesive strength ensures a secure and reliable application. The sealing tape comes in 40 mm wide rolls and can be cut to the desired length with the appropriate tool. Each roll contains five meters of tape. The use of soni NBR sealing tape A typical application of soni NBR is in the construction of a curtain wall, where the tape is used to acoustically decouple the wooden lathing. As our product is suitable for contact with oils, e.g. engine oil, our sealing and decoupling tape has also proven its effectiveness and practical use in many technical areas, for instance in vehicles, machines, housings, hoods and other areas for many years now. What is more, our soni NBR is extremely resistant to deformation and wear, which makes it much more durable than other products in this field. The self-adhesive rear face makes installation fast and easy. Do you have any questions about our soni NBR sealing tape or other products from our soniflex shop? If so, please get in touch and we will be happy to help you.

Content: 5 m (€1.58* / 1 m)

€7.90*

Overview of the contents of the soni mounting set

soni FIXING SET

For the mechanical fixation of soundproofing material. Set 1 (for 25 to 32 mm thick material) consists of 20 nylon anchors 8x40, 20 screws 6x70/42 and 20 fixation disks. Set 2 (for 50 to 52 mm thick material) consists of 20 nylon anchors 8x40, 20 screws 6x90/56 and 20 fixation disks.

Variants from €11.50*

€9.50*

Details

Related products

Section of a PUR foam panel with black foil surface

soni 491

Thickness: 10 mm

soni 491 is a PUR acoustic foam coated with a micro-perforated film. The sound-permeable film prevents the penetration of dirt and liquids and can be wiped clean. Our soni 491 acoustic foam has proven its effectiveness in many years of practical use, successfully minimizing noise levels and providing thermal insulation in engine compartments and vehicle interiors. It meets the fire safety standards for the automotive industry as set down in FMVSS 302 and DIN 75200. Also for the insulation of your roller shutter box we can recommend the PUR foam without restrictions. soni 491 scores with high hydrolysis resistance and hence significantly higher aging stability.The material is easy to cut to the desired size and shape with a carpet knife. Moreover, the self-adhesive rear face makes installation fast and easy.

Content: 0.5 m² (€27.80* / 1 m²)

€13.90*

Section of a PUR foam panel with diamond pattern

soni 471

Thickness: 10 mm

soni 471 – PUR acoustic panels for long-lasting sound and heat insulation Order PUR foam acoustic panels from soniflex The soni 471 acoustic panel is a high-quality PUR acoustic foam with a diamond-shaped thermal embossing that ensures a compacted and sealed surface. This structure makes the material particularly robust, durable and resistant to dirt – ideal for use in demanding environments. The air-permeable embossing also improves acoustic effectiveness, especially in the frequency range of typical engine noises. This makes soni 471 the perfect choice if you want to effectively reduce noise in your vehicle while also achieving a visually appealing surface. Areas of application for soni 471 Our soni 471 acoustic foam impresses with its high hydrolysis resistance and is therefore particularly frequently used in the automotive sector. Typical applications are: ✔ Sound-absorbing and heat-insulating interior trim for motorhomes, classic cars or commercial vehicles ✔ Engine compartment insulation and vehicle floor insulation ✔ Applications in mechanical and plant engineering where robust sound absorbers are required The acoustic foam naturally complies with the fire standards required for the automotive sector in accordance with FMVSS 302 and DIN 75200. Easy processing and installation Installing soni 471 couldn't be easier: the panel can be cut to the desired size with a craft knife. Thanks to its low weight and self-adhesive backing, it can be attached quickly, cleanly and permanently – even on slightly uneven surfaces. This saves you time during installation and allows you to benefit immediately from a noticeable reduction in noise and heat. Technical advantages at a glance ✔ PUR acoustic foam with diamond-shaped thermal embossing ✔ Compacted, dirt-resistant surface ✔ Air-permeable structure for high sound absorption ✔ High hydrolysis resistance (particularly durable) ✔ Complies with FMVSS 302 and DIN 75200 ✔ Self-adhesive backing for easy installation ✔ Ideal for vehicle insulation, machine cladding and technical equipment

Content: 0.5 m² (€21.80* / 1 m²)

€10.90*

Tip

Section of a PUR foam panel with nub shape

soni WAVE

Rear face: not self-adhesive (nk) | Thickness: 30 mm

Order egg-crate foam from soniflex Our soni WAVE egg crate acoustic foam is a highly effective noise-control product made from PUR-foam with a structured “egg-crate” surface. The sealed but air-permeable surface (patented process) absorbs sound waves effectively and is also reliably oil-, water- and fuel-repellent. Uses of soni WAVE The visually attractive wave structure of the surface ensures excellent absorption values in all frequency bands. With its robust structure and excellent noise-absorption capability, soni WAVE is a unique kind of napped acoustic foam that is especially suited to technical applications, for instance in noise-control enclosures for machines. Its excellent absorption values and its characteristic profiled surface make it also very popular for use in recording studios and music rehearsal rooms. soni WAVE egg crate acoustic foam is easy to cut to the desired shape with a carpet knife. The low weight as well as the optional self-adhesive rear face make for easy and time-saving installation of the material. For fixing the non self-adhesive version of our soni WAVE panels, we recommend our soni SPECIAL ADHESIVE

Content: 0.5 m² (€23.80* / 1 m²)

€11.90*

soni EVA

soni EVA is a soft, elastic heavy layer on the basis of EPDM/EVA polymers with an admixture of flame-retardant minerals. Our soni EVA heavy layer is suitable specifically for technical applications, vehicles and machinery. It is designed to eliminate vibrations and drumming of sheet metal and metal parts. Applied to a metal structure, soni EVA will effectively reduce the sound level and prevent the transmission of noise and vibration. For soni EVA, the optional self-adhesive equipment of the rear face serves primarily as an installation aid. In the case of installation on a vertical surface or on a ceiling, we recommend additional mechanical fixation.

Content: 0.5 m² (€27.80* / 1 m²)

€13.90*

Details

Section of a PUR foam panel with black fleece surface

soni DECOR

Our soni DECOR acoustic foam consists of polyurethane- foam laminated with a sound-absorbing non-woven surface layer. The black polyester non-woven is extremely robust as well as oil- and fuel-repellent. Due to the resistant non-woven surface, soni DECOR is widely used in technical applications. For instance, soni DECOR is ideally suited for use as sound-absorbing and heat-insulating interior lining in mobile homes, classic cars or other vehicles. Also in your home workshop, soni DECOR will achieve an effective noise reduction. Using a carpet knife, you can cut soni DECOR to the required size and shape. The material’s low weight as well as the optional self-adhesive rear face make for easy and time-saving installation. For fixing the non self-adhesive version we recommend our soni SPECIAL ADHESIVE The premium soni DECOR soundproofing panel scores not only with its excellent sound-absorbing properties, but also with its outstanding quality. The first-class acoustic foam contributes to optimum noise reduction in all kinds of indoor and technical areas and provides optimum sound absorption efficiency. The DECOR sound-absorbing panel is particularly recommended for noise reduction in production halls, workshops, rehearsal rooms and recording studios. Also for reducing the noise emitted by vehicles or machines as well as in engine compartments, the soni DECOR noise absorption panel is the product of choice. Do you have questions about our soni DECOR soundproofing panel? Please feel free to contact us. We shall be pleased to provide help and advice!

Content: 0.5 m² (€25.80* / 1 m²)

Variants from €15.90*

€12.90*

Details

soni SB 700

Our soni SB 700 sound-insulation panel is a two-layer product consisting of a highly sound-absorbing, hydrophobic polyester non-woven and a synthetic heavy layer (soni EVA 6-01). This newly developed combination has both sound-absorbing and sound-insulating capacity with especially high effectiveness in the frequency range of compressors. This makes it the optimum solution for substantially reducing the noise pollution caused by the compressors typically used in heat pumps or air-conditioning systems. In a few simple steps you can build a DIY compressor jacket from our soni SB 700 noise control panels. All you need to do is to measure the compressor’s dimensions and cut corresponding parts from the soni SB 700 acoustic panel with a carpet knife. Then fit the pieces like a shell around the compressor and seal the joints with soni VLC adhesive tape. Our assembly instructions illustrate the three easy steps to building a compressor shell.

Content: 0.5 m² (€65.80* / 1 m²)

€32.90*

soni COMPOSITE

Sound insulation sheets for wall and ceiling

Order your soundproofing panel from soniflex

Applications for soni COMPOSITE

Contact us