soni RESIST SK (special offer)

For the mechanical fixation of soundproofing material. Set 1 (for 25 to 32 mm thick material) consists of 20 nylon anchors 8x40, 20 screws 6x70/42 and 20 fixation disks. Set 2 (for 50 to 52 mm thick material) consists of 20 nylon anchors 8x40, 20 screws 6x90/56 and 20 fixation disks.

Our soni MOUNTING PINS offer an easy and fast method for the installation of acoustic materials on smooth and clean surfaces.  soni MOUNTING PINS have a base plate with self-adhesive back. The high-quality adhesive ensures secure installation of our acoustic materials for the long term. Use the enclosed fixation disk to hold the noise protection material in place. And, as a last step, cover the tip of the steel pin with the protective cap. The kit consists of 20 base plates with pin, plus fixation disks and protective caps.Kit 1 (pin length: 42 mm) is suitable for noise-control panels of 25 – 30 mm thicknessKit 2 (pin length: 63 mm) is suitable for noise-control panels of 50 mm thickness

UHU POLY MAX® Assembly Adhesive – A strong bond for long-lasting outdoor applications UHU POLY MAX® assembly adhesive is a high-quality, extremely strong adhesive designed for the secure fixing of soni RESIST / soni RESIST UV soundproofing panels in both indoor and outdoor environments. When used in combination with the soni SPIRALE RESIST, it creates a reliable fixing system that can withstand even the most demanding weather conditions over the long term. Installation is simple and efficient: first, the soni SPIRALE RESIST is screwed into the soundproofing panel. The adhesive is then applied to the protruding end of the spiral, and the panel is pressed onto the prepared substrate. The assembly adhesive permanently bonds the spiral to the substrate, ensuring a robust and long-lasting fix. Your benefits at a glance ✔ Exceptionally high initial adhesion and final strength✔ Permanent fixing of soni RESIST and soni RESIST UV sound insulation panels ✔ Ideal for outdoor use ✔ Simple and clean installation ✔ Weather-resistant bond✔ The perfect complement to soni SPIRALE RESIST Application For installing soni RESIST (UV) panels, we recommend using UHU POLY MAX® Assembly Adhesive in combination with the soni SPIRALE RESIST. The adhesive bonds perfectly to the spiral, ensuring a reliable and durable connection. 1. Screw the soni SPIRALE RESIST into the soundproofing panel. 2. Apply the assembly adhesive to the end of the spiral. 3. Press the panel onto the prepared substrate and align it. 4. Allow the adhesive to cure before subjecting the panel to full load. Important note:Due to the material properties of the soundproofing panel, the adhesive does not bond directly to the surface of the insulation material. A secure and permanent fix is therefore only possible in combination with the soni SPIRALE RESIST. Using UHU POLY MAX® installation adhesive and soni SPIRALE RESIST, you can install your soundproofing panels quickly, securely and permanently – for effective acoustic solutions in both indoor and outdoor areas.

soni SPIRALE RESIST: Invisible fixing for your soni RESIST acoustic panels With the soni SPIRALE RESIST stainless steel mounting screws, you can fix your acoustic panels securely, permanently and almost invisibly to walls or ceilings. The screws are screwed directly into the panel, creating a stable base for the UHU POLY MAX® mounting adhesive. This results in a particularly elegant fixing solution with no visible screws or fixings. Conventional adhesives do not adhere directly to soni RESIST acoustic panels. The mounting spirals are therefore inserted between the wall and the panel: the specially formulated mounting adhesive bonds the wall to the spirals, whilst the spirals hold securely within the soni RESIST panel. This ensures the panels are fixed reliably and permanently. Made from stainless steel, the soni SPIRALE RESIST mounting spirals are suitable not only for indoor use but also for use in damp environments such as swimming pools, sports facilities, car washes or sheltered outdoor areas. Benefits at a glance ✔ Concealed fixing for a high-quality finish✔ Secure and durable installation of soni RESIST and soni RESIST UV panelsbr ✔ Ideal for wall and ceiling applications ✔ Robust, rust-free stainless steel ✔ Suitable for indoor use, damp areas and sheltered outdoor applications Installation recommendations To ensure secure and even fixing, we recommend: ✔ Installation: 4–5 mounting spirals per soni RESIST panel ✔ Always use mounting screws in combination with an adhesive ✔ Maintain a minimum distance of 150 mm from the edge of the panel ✔ Distribute fixing points evenly across the entire acoustic panel ✔ Allow the adhesive to cure fully before subjecting the acoustic panels to full load The soni SPIRALE RESIST mounting spirals ensure a professional, durable and visually appealing installation of your acoustic panels – for maximum design freedom and the best acoustic results.