Special acoustic adhesive for sound-insulations materials and acoustic elements

  • Excellent adhesion on a wide variety of substrates
  • Solvent-free adhesive
  • Suitable for full-surface and spot application
  • Watch tutorial ➥continue to YouTube
Cartridge / Set of 6 or 12 cartridges


Content: 1 piece(s)
Prod. no. 80800012

Available, delivery time 2-5 days


Our soni SPECIAL ADHESIVE is an ideal adhesive for spot and full-surface fixation of sound-insulation materials and acoustic elements made of open-cell foam, especially melamine and PUR foams.

The solvent-free, stable soni SPECIAL ADHESIVE provides excellent adherence to typical building materials, such as concrete, plaster, masonry, cement and wood. With the elastoplastic, single-component polymer adhesive, our open-cell foam panels can be glued directly to the wall or ceiling.

Our soni SPECIAL ADHESIVE is available in 310-ml-cartridges, in sets of 6 or 12 cartridges.

Please note: 

soni SPECIAL ADHESIVE is not suitable for PE foams such as soni RESIST. 

Keep out of reach of children!

Technical data
Accessories: Accessories
Applications: Living space | Staircase
Car | Motor | Boat
Clubhouse | Banquet hall
Indoor swimming pool | Sports facility
Kindergarten | School
Hospitality | Lunchroom
Waiting rooms | Doctor's office
Wall towards neighbors | Curtain wall
Production hall | Workshop
Heat pump | HVAC
Sound studio | Rehearsal room
Office | Call center
Machine | Compressor | Utility room
Cartridge / Set of 6 or 12 cartridges: cartridge of 310 ml
Color: white
Note: - Sufficient for approx. 2 m²
- Easy handling
Temperature resistance: -20°C to +80°C
Product information request

Related products

For the mechanical fixation of soundproofing material. Set 1 (for 25 to 32 mm thick material) consists of 20 nylon anchors 8x40, 20 screws 6x70/42 and 20 fixation disks. Set 2 (for 50 to 52 mm thick material) consists of 20 nylon anchors 8x40, 20 screws 6x90/56 and 20 fixation disks.

Variants from €11.50*
soni MOUNTING PINS (20 pieces)
Our soni MOUNTING PINS offer an easy and fast method for the installation of acoustic materials on smooth and clean surfaces.  soni MOUNTING PINS have a base plate with self-adhesive back. The high-quality adhesive ensures secure installation of our acoustic materials for the long term. Use the enclosed fixation disk to hold the noise protection material in place. And, as a last step, cover the tip of the steel pin with the protective cap. The kit consists of 20 base plates with pin, plus fixation disks and protective caps.Kit 1 (pin length: 42 mm) is suitable for noise-control panels of 25 – 30 mm thicknessKit 2 (pin length: 63 mm) is suitable for noise-control panels of 50 mm thickness

soni VELCRO tape
Strongly adhesive Velcro tape - for easy and fast installation of acoustic materials made from polyester (PES) non wovens. (Only for wall mounting)Our soni VELCRO tape is ideal for fastening acoustic elements such as soni ELEMENT, soni COMFORT, soni CIRCLE or soni HEXAGON.Cut off the Velcro tape to the required length. Remove the protective film from the tape's adhesive side and stick the Velcro tape with the adhesive backing to the wall. Then press the acoustic element on the Velcro tape to fix it. This fixation method allows the acoustic element to be replaced at any time if necessary.Recommended length of the Velcro tape: For a secure hold, cut the Velcro tape to approximately the width of the acoustic element.

Content: 5 m (€4.98* / 1 m)

soni RING HANGER - for easy and fast mounting of acoustic materials. An excellent solution for the installation of sound absorbers such as soni ELEMENT, soni PROTECT or soni COMFORT.After removing the protective film, affix the soni ring hanger at the desired place on the acoustic element and hang the element from a screw hook (not included in the scope of delivery) or similar on the wall or ceiling.Ring hanger, self-adhesive for strong, long-term bondDimensions: 4.5 x 4.5 cm + ringMax. load per ring hanger: max. 1 kg

soniflex foam suspension spirals (24 pieces)
Acoustic baffles are hung from the ceiling by means of foam-suspension spirals (mind. 50 mm). They are easily inserted into the sheets and can be suspended by means of the eyelets on a wire rope or suspended from hooks.The eyelets can be bent open to serve as hooks. Dimensions: diameter 15 mm, total length 80 mm, length of the coils 69 mm A kit consists of 24 spirals.

Content: 24 piece(s) (€1.04* / 1 piece(s))